One Step Crystallizer 1 GAL



One Step Crystallizer Spray N’ Buff

One Step Crystallizer Spray N’ Buff has been developed as a simple-to-use restoration system for marble, terrazzo, and polished limestone floors.
One Step Crystallizer Spray N’ Buff produces a very high polish.
The newly restored surface will resist scuffs and scratches.
This restored surface will be very durable.
One Step Crystallizer Spray N’ Buff dries as you buff and therefore requires no messy clean-up.


SURFACE PREPARATION: The surface must be clean and dry. On floor surfaces, make sure all waxes, floor finish, or other coatings are removed. If there is a coating on the floor, use NCL HURRICANE™ Intensive Stone Cleaner for removal. Rinse the surface thoroughly with water and air dry prior to crystallization.

PLEASE NOTE: Worn out or damaged surfaces may require resurfacing prior to crystallization. Make sure to cover any sensitive surfaces such as metals, glass, carpet, etc. that may be exposed to over-spray.

APPLICATION: Use a 175 RPM Floor machine designed for crystallization (130 – 180 lb.), equipped with a #0 or #1-grade steel wool pad. Apply ONE STEP™ Crystallizer Spray N’ Buff (with a spray bottle with trigger) at a rate of 2 to 3 squirts per square yard (.836 sq. meter) and immediately buff until surface is completely dry. Buff in both directions until desired gloss is achieved. ONE STEP™ Crystallizer Spray N’ Buff yields approximately 2000-5000 square feet (185 – 465 sq. meters) per gallon of coverage.

Additional information

Weight 9.2 lbs
Dimensions 6 × 11 in