Concrete & Paver sealer 100% clear by Acrytop 1g
You can apply it on many surfaces:
- Stamped Concrete
- Exposed Aggregate
- Non Yellowing
- Water repellent
- Made in the USA
- Fast Drying
Concrete & paver sealer by Acrytop is a clear emulsion that provides a highly durable wet look finish. The 100% acrylic resin is non-yellowing.
It provides the highest quality protection for exterior or interior surfaces, such as concrete, stone, metal, wood, masonry, pavers, bricks, etc.
All surfaces, whether painted or unpainted, must be CLEAN, SOUND, AND DRY before applying this product. All dirt, grease, wax, mildew, loose or peeling paint, and other contaminants, must be removed. Clean surface by brush, dry compressed air, sandblasting, or other effective means, prior to applying Acrytop sealer. Test a small area for (compatibility) and to assure that a continuous film can be formed. Water-repelling with this product is dependent upon forming a continuous film over the surface. Apply two coats for better results.
250 to 450 sq. ft. per gallon, depending on the method of application, and porosity of the substrate. For optimum results, two coats are suggested.
Use at package consistency. Acrytop is as ready as it comes from the can. If thinning is desired add no more than one pint of xylol per gallon. Mix thoroughly by stirring, use a flat paddle, turning paint with a lifting motion until smooth in consistency and uniform in color.
METHOD OF APPLICATION:
Apply with lambskin roller, natural bristle brush, or spray equipment. (Set spray at lowest possible pressure for better results.) Paint only when the temperature is above 55F. Avoid painting late in the day or when rain is imminent.
Do not thin. If thinning is desired add no more than one pint of acetone per gallon.
Set to touch 15 – 30 minutes: Re-coat 45 – 60 minutes. Heavy traffic: 24 hours. Weather conditions, such as temperature, sunshine, wind, may also alter drying times.
Acrytop concrete & paver sealer 100% clear