Twister Mineral Deposit / Cement Film Remover

Description

Twister Mineral Deposit / Cement Film Remover

Twister Mineral Deposit film remover is a highly concentrated, fast-acting, acid-based cleaner for use on textured granite and other non-polished natural stones as well as unglazed ceramics. TWISTER removes grout and mortar residues, lime and hard water mineral deposits, efflorescence, surface rust, and heavy construction dirt.

DIRECTIONS:

Protect all adjacent non-masonry and polished stone surfaces. Wet area to be cleaned with clean water prior to any application of this product. Dilute 1 part TWISTER with 5 parts of cool to warm water (a higher dilution may be required for heavy concentrations of mineral deposits and efflorescence). Apply the diluted solution to the wet surface and agitate vigorously with a stiff bristle brush or natural fiber buffing pad. Allow 5 minutes of dwell time and rinse well with clean water. Continue to rinse until all the solution has been removed.

COVERAGE:

800 to 1,000 sq. ft. per gallon

NOTE:

THIS PRODUCT IS NOT FOR USE ON POLISHED MARBLE, LIMESTONE, TERRAZZO, TRAVERTINE OR ANY OTHER CALCIUM CONTAINING POLISHED STONE.

Always dilute with water, this product is not intended for use full strength.

Contains Hydrochloric Acid and may cause corrosion on some metal surfaces.

Test for suitability and appropriate dilution in a small inconspicuous area prior to general use.