DESCRIPTION

Versatile, water emulsion, hard surface sealer to produce an outstanding wear surface with outstanding chemical resistance and durability. Scientific multi-polymer technology prepared by high pressure emulsification and polymerization. Thermoplastic resins, coupling solvents, penetrants, plasticizers, and leveling aids— all combined to produce superior gloss and durability without the fire and vapor hazard of solvent type sealers.

Code: 0525

Packaging: 

·         5 Gal Pail

·         1 Gal

DIRECTIONS

Floor Preparation: Thoroughly clean the floor using CONKLEEN™ Concrete Cleaner or ASTRO-CHEM™ Degreaser Cleaner. On oily and greasy garage floors, use an emulsifiable solvent cleaner. Clean walls with a degreaser cleaner or pressure cleaner. Rinse cleaned surface thoroughly and allow to dry for at least one hour.

For Concrete & Other Porous Surfaces: Apply PRO-SEEL™ Water Emulsion Hard Surface Sealer with a brush, roller, or applicator and allow to dry for a minimum of one hour between coats. Where required for gloss or to provide uniform coverage, two or more coats may be applied. To recoat traffic lanes, clean and allow to dry, and apply PRO-SEEL™ Water Emulsion Hard Surface Sealer as above. Stripping is not required.

For Use on Terrazzo, Glazed Brick, Quarry Tile, & Other Low Porosity Surfaces: Use the same procedure as above.

FEATURES & BENEFITS

Superior Surface Protection: Extends life of wear surface for maximum optimal appearance

No Etching Required: Reduces labor costs in application

Multi-Polymer Emulsion: Provides for optimum gloss, durability, and chemical resistance

High Solids Formula: Maximum wear surface available to eliminate re-coating

Water-Based Emulsion: No toxic fumes, fire hazards, or lengthy drying times

SPECIFICATIONS

Flow: Excellent

Leveling: Excellent

Durability: Excellent

Transparency: Water Clear

Chemical Resistance: Superior

Gloss 60°: 91

Flexibility: Excellent

Emulsion pH: 8.2

Coverage: 1st coat 600-800 sq ft/ gal— 2nd coat 1200-1600 sq ft/gal

Viscosity (cps): <10 cP

Nonslip: Yes

Flash Point: Not available

Odor: Acrylic

Polymer Type: Multiple Component

Resin Type: Thermoplastic

Freeze-Thaw: Protect from Freezing

Specific Gravity (g/cc): 1.02 ± 0.01

Density (lbs/gal): 8.5 ± 0.1

Removable: Yes, with special stripper

Shelf Life: 1 year minimum in original unopened container

SAFETY

KEEP OUT OF THE REACH OF CHILDREN

Prevention: Observe good industrial hygiene practices.

Response: Wash thoroughly after handling.

Storage: Store away from incompatible materials.

Disposal: Dispose of contents/container in accordance with local/regional/national/international regulations. 
This product is not known to be a “Hazardous Chemical” as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200.

Additional Safety Measures: Read the entire label and SDS before using this product, and for additional first aid measures.