Wet Look
High Gloss Clear Sealer

Wet Look clear sealer high technology formulation is a high performance, professional grade, ready-to-use water-based sealer designed to seal and weatherproof, protect and enhance color of variety of surfaces.

Wet Look is formulated to impart long term protection to pavers, concrete, masonry, stucco, brick, natural and artificial stone and aggregate. Wet Look clear sealer is ideal for use on interior and exterior, applications. Product is not recommended for use on driveways.

Features & Benefits

  • Waterproof
  • Water clean–up
  • Protect surface
  • Mildew resistant
  • Enhances color of substrate
  • Vapor permeable
  • Dries clear and non-yellowing
  • Eco-Friendly and low VOC
  • Excellent water whitening resistance
  • Easy to use

Directions

Always test each type of surface to ensure desired results. Let test area dry before inspection. Stir or shake before applying. For best results, follow this procedure:

    1. Do not apply sealer when temperatures are less than 50°. For expected to drop below 50°F during the next 6 hours.
    2. Do not apply sealer when temperatures are higher than 90°F.
    3. Do not apply sealer in rainy conditions or when rain is expected within 24 hours.
    4. Application to be made using low pressure high quality pump sprayer, brush or 3/8” nap roller. DO NOT ATOMIZE.
    5. Holding tip 6” – 12” from surface using overlapping spray pattern and fanning motion at the end of each horizontal pass.
    6. Entire area being treated is to be saturated but do not allow sealer to puddle. If puddling occurs make sure to disperse puddle area with a broom or paint roller in order to avoid any whiting effect which may occur.
    7. Clean all dips, runs, and overspray residue while still wet.
    8. Allow product to dry for 24 hours.
  • MIXING: Always mix thoroughly before and during application.
  • THINNING: This product is not to be thinned.
  • CLEAN-UP: Clean all equipment immediately after use with warm soapy water. Completely flush all spray equipment with this solution.
  • DRYING TIME@ 77OF @ 50% RH: Temperature and humidity dependent. To touch: 1 hour To recoat: 4 hours

Specifications

  • Available Sizes:
    • 1 Gallon (~4 liters)
    • 5 Gallon (~19 liters)
  • SOLIDS: 25.00 ± 1% by weight 23.00 ± 1% by volume
  • V.O.C LEVEL: 92 g/L
  • WEIGHT / GALLON: 8.5± 0.5 lbs.
  • pH: 8.5 – 9.5
  • FINISH: High Gloss
  • FLASH POINT: Non-flammable
  • FIRE RATING: Class A
  • VISCOSITY: Liquid
  • SUGGESTED FILM THICKNESS, COVERAGE PER COAT:
    150 – 300 sq.ft. per gal. (First Coat)
    300 – 400 sq.ft. per gal. (Second Coat)
    *Coverage figures do not include surface porosity, irregularities & material loss due to application methods.

Safety

  • Handling: Wear suitable gloves and eye protection. Ensure adequate ventilation during application.
  • Storage: Store in a cool, dry place away from direct sunlight and frost. Keep the container tightly closed.
  • Flammability: Wet Look is non-flammable, the product can emit toxic fumes when exposed to flame. Keep away from heat and open flames.
  • First Aid:
    • Eye Contact: Rinse immediately with plenty of water and seek medical advice.
    • Skin Contact:  Wash with soap and water.  
    • Ingestion:  Do NOT induce vomiting. Seek medical attention immediately.
    • Inhalation: Remove to fresh air. If breathing is difficult, seek medical attention. Use artificial respiration if necessary.
Instagram Facebook Youtube Linkedin Book-open
cropped-cropped-Kong-Logo-1.webp

Hours of Operation

Monday – Friday
7:00am – 5:00pm

 

Saturday
8:00am – 12:00pm