Bare Bones Floor Stripper
Bare Bones Stripper is 55% active speed stripper that easily cuts through multi-layers of burnished floor finish. This “true” no-rinse stripper does not contain potassium hydroxide or sodium hydroxide yet is the fastest working liquefier on the market. Low foaming, no scrub, and no-rinse features make this product a must for all professional floor care systems.
- DIRECTIONS
-
- Dilute BARE BONES® following dilution recommendations below. Dilute using cold or mildly warm water only.
- Light/Normal Buildup: 8 oz per gallon of water (1:16)
- Heavy Buildup (Burnished): 20 oz per gallon of water (1:5)
- Mop/Wet Vacuum Stripping System:
Apply liberally with a mop to an area small enough so as not to allow the product to dry and allow to stand for 3 to 5 minutes.
Agitate with a mop and remove the solution and old finish with a wet vacuum.
Allow the floor to dry thoroughly and apply a new finish as directed by the manufacturer.
If complete stripping is not accomplished repeat the above procedure before re-application of recommended NCL Floor Finish. - Floor Machine Stripping System: Allow to stand for 3 to 5 minutes, scrub with a rotary floor machine or automatic scrubber equipped with stripping pads.
Remove the solution and old finish with a wet vacuum and allow the floor to dry completely.
If desired, a rinsing step can be added. Apply recommended NCL Floor Finish as per instructions.
- Mop/Wet Vacuum Stripping System:
Note: Asphalt tile, Linoleum, and other sensitive floor surfaces may be damaged by contact with a stripping solution.
We recommend that a spot test be conducted before general use.